Adding reactive

Adding reactive (addition of reagent).
Adds a desired chemical reagent of a given dose. It can test a water dosed reagent additions (by injection), and check the action of these on calcocarbonic water balance.
Or 4 options to choose from (currently):

1. adding an acid product (6 reagents choice)
   • Sulfuric acid (H2SO4)
   • Hydrohloric acid (hydrogen chloride, HCl)
   • Carbonic acid (carbon dioxide, CO2)
   • Nitric acid (HNO3)
   • Phosphoric acid (H3PO4)
   • Acetic acid (COOH-CH3)
     
     
2. adding an alkaline product (6 reagents choice),
   • lime (calcium hydroxide, Ca[OH]2)
   • caustic soda (sodium hydroxide, NaOH)
   • sodium carbonate (soda ash, Na2CO3)
   • sodium bicarbonate (sodium hydrogencarbonate, NaHCO3)
   • calcium carbonate (limestone, CaCO3)
   • calcined dolomite and uncalcined dolomite (dolomite)
     
     
3. adding an calcic product (2 reagents),
   • calcium chloride (CaCl2)
   • calcium sulfate (CaSO4)
     
     
4. adding an chlorinated product (Cl₂ chlorine gas or bleach solutions [French "eau de Javel"])
   Chlorine gas (Cl2)
   Bleach solutions(concentrated or diluted)

(utilisez votre navigateur)